| Understanding FDM |
Design to minimize the need for supports |
☐ |
| Print Size |
The maximum print size we can support is 320 x 350 x 330 mm |
☐ |
| Wall Thickness |
Ensure walls are at least 1mm thick |
☐ |
| Resolution |
We have 3 print resolutions: High (100 microns), Medium (200 microns), Low (300 microns) |
☐ |
| Clearance |
Allow for 0.5mm clearance between interlocking parts |
☐ |
| Orientation |
Consider how orientation affects strength, print time, and finish |
☐ |
| Material |
Choose a material that suits the intended use of your model |
☐ |
| Hollowing Large Models |
Hollow out larger models to save time and material, while maintaining strength |
☐ |
| Rafts or Brims |
Consider adding these for models with a small base to improve print reliability. |
☐ |
| Testing |
If possible, test print a section or smaller scale of your model first |
☐ |
| Format |
Use software that can export to STL format which is compatible with our slicer |
☐ |
